Polyethylene Water Supply Pipe

Heat-Line is pleased to provide their valued customers with Endot EndoPure HDPE Pipe, the highest quality high density polyethylene water supply pipe available in North America. Manufactured of advanced PE4710 resin which yields a water supply pipe with a 100 year life expectancy in comparison to the industry acceptable 50 years, and provides a 25% greater pressure rating than a compatible water supply pipe manufactured of PE3408. EndoPure HDPE pipe is NSF-14 and 61 certified drinking water safe and is engineered to meet the AWWA C901-08 standards. EndoPure is extruded of only the finest PE4710 resin which is certified as 100% virgin materials and is free from lead, chlorine and solvents. EndoPure is not only the most unique and highest performing pipe in the industry, but Endot supports it with the best warranty in the industry.

Features

EndoPure HDPE water supply pipe is the only pipe designed specifically for the water industry. Manufactured of advanced 100% virgin PE4710 resin, EndoPure is a unique high performance and premium pipe. EndoPure HDEP pipe offers quality, reliability and consistency like no other pipe product available in North America.

Heat-Line is now providing their valued customers with the opportunity to access a unique premium HDPE polyethylene water supply pipe rarely found in Canada for an exceptional price. Heat-Line offers 1" SIDR 9 IPS EndoPure polyethylene pipe which has the following advantages:

  • EndoPure has a clear core of 100% virgin natural HDPE EndoPure is produced from a High Performance HDPE known as PE 4710, the most advance and best quality polyethylene resin found in North America.
  • EndoPure has a 25% greater pressure rating in comparison with other polyethylene piping manufactured from PE3408
  • EndoPure when accidentally gouged or cut will show the clear core, a visual indication that significant damage has occurred, something that is hard to spot on solid coloured pipe.
  • EndoPure is completely compatible with current fitting and connectors made for HDPE water pipe including Heat-Line’s wide range of Philmac fittings.
  • EndoPure has continuous consecutive footage marks, permanently embossed every two feet to assist in measuring and installation.
  • EndoPure is UV stabilized for storage of pipe above ground. When installed underground life expectancy is up to 100 years. Double that traditional poly pipe tubing.
  • EndoPure is NSF Certified to NSF -14 & 61 and meets AWWA C901-08 standards
  • EndoPure is backed by the strongest warranty in the industry.

If you feel you have a special or unique application for polyethylene water pipe please contact Heat-Line directly and speak with one of our knowledgeable product specialists.

Click to Minimize

APPLICABLE STANDARDS

ENDOT EndoPure meets the specifications of NSF-14 & 61, AWWA C901-08 plus the following standards:

Material Standards

  • PE 4710
  • ASTM D3350 - Cell Classification
  • UV Stabilized Clear Center - 445576D
  • UV Stabilized Blue Exterior - 445576E
  • ASTM D1505 - Density .949 g/cc
  • ASTM D1238 - Melt Index >0.08 g/10 min
  • ASTM D638 - Tensile Strength >3600psi
  • ASTM D638 - Elongation >740%
  • ASTM D2837 - Hydrostatic Design Basis 1600psi @ 20ºC
  • ASTM D790 - Flexural Modulus 150,000psi
  • ASTM D746 - Brittleness Temp. <-103°F
  • ASTM D1693 - Slow Crack Growth Pent >25,000 hours

Dimensional Standards

  • ASTM D2239 - SIDR - Iron Pipe Size (IPS), Controlled Inside Diameter
  • ASTM D2737 - SODR - Copper Tube Size (CTS), Controlled Outside Diameter
  • ASTM D3035 - DR - Iron Pipe Size (IPS), Controlled Outside Diameter
Click to Minimize
  • The only HDPE pipe designed for the water industry
  • Lead free, chlorine free and solvent free
  • Available from Heat-Line as SIDR-9, 1'' (IPS) ID Controlled
  • Certified PW NSF-14 & 61
  • Meets AWWA C901-08 standards
  • Manufactured of PE4710 resin
  • Outer colour coding blue extrusion to meet international standard for water pipe
  • Clear core of virgin natural HDPE that shows through when pipe is mechanical damaged
  • PE4710 has a 25% higher pressure rating than common PE3608
  • Continuous and consecutive footage marks every two feet
  • UV stabilized for protection from damaging UV rays
  • Life expectancy of 100 years in comparison to industry standard of 50 years
  • Print line/ pipe nomenclature permanently embossed
  • EndoPure is compatible with Heat-Line range of Philmac 3G compression fittings
  • Best warranty in the industry
Click to Minimize

EndoPure HDPE is not manufactured by Heat-Line and as a result is warranted only to the extent of original manufacturer’s (Endot Industries) warranty.

For specific warranty information on EndoPure please see the downloadable EndoPure Warranty Document.

Click to Minimize

Heat-Line is pleased to offer Endot EndoPure HDPE to meet the growing needs of the plumbing industry.

Heat-Line part numbers below represent inventoried EndoPure HDPE, and therefore are readily available.

Part Number: POLYPIPE160-1-300

Description:  200 psi High Density Polyethylene Pipe EndoPure-PE-4710-Blue, 1 in. ID, 300 ft.

Part Number: POLYPIPE160-1-400

Description:  200 psi High Density Polyethylene Pipe EndoPure-PE-4710-Blue, 1 in. ID, 400 ft.

Part Number: POLYPIPE160-1-500

Description:  200 psi High Density Polyethylene Pipe EndoPure-PE-4710-Blue, 1 in. ID, 500 ft.

 

Click to Minimize

Click here to request a quote.

Click to Minimize

EndoPure HDPE Accessories

INSUL-1.00 Closed cell polyethylene insulation sleeve for 1” pipe (6’ long, 1 5/8” ID, ¾” thick wall)
PFA-075/100 Female Adapter, 3/4 inch ID Compression x 1 inch FIP thread
PMA-075/100 Male Adapter, 3/4 inch ID Compression x 1 inch MIP thread
PC-100 Coupling for 1 inch ID Compression
PMA-100 Male Adapter, 1 inch ID Compression x 1 inch MIP Thread
PMA-100/125 Male Adapter, 1 inch ID Compression x 1 1/4 inch MIP Thread
PMA-125/100 Male Adapter, 1 1/4 inch ID Compression x 1 inch MIP Thread
PFA-100 Female Adapter, 1 inch ID Compression x 1 inch FIP Thread
PBF-100 Female 90 Degree Elbow Adapter, 1 inch ID Compression x 1 inch FIP Thread
PBF-100/125 Female 90 Degree Elbow Adapter, 1 inch ID Compression x 1 1/4 inch FIP Thread
PT-100 Tee Adapter for 1 inch ID Compression
PTF-100 Tee Adapter Female Branch Thread, 1 inch ID Compression x 1 inch ID Compression x 1 inch FIP branch Thread      

INSULATION

When the pipe is going to be freeze protected with a Heat-Line heating cable system insulation is highly recommended. Insulation is recommended for all new pipe installations, even where the pipe is to be buried. For existing pipe applications, insulation is only required where the pipe is exposed to ambient outdoor temperatures, and/or where the pipe is above the ground. Insulation aids in heat retention making the heating cable more energy efficient and providing cold weather reliability.

Click here for insulation.

PHILMAC FITTINGS

The Philmac 3G Compression fittings line-up is the next generation of water line compression fittings and offers the most advanced and interchangeable solutions available on the market today. Heat-Line is pleased to offer a wide range of Philmac’s 3G Compression style fittings that will provide multiple options of adapting to and connecting to the connecting to the EndoPure polyethylene pipe.

Click here for Philmac Fittings.

Click to Minimize

Q – What is HDPE?

A – HDPE is the abbreviation for High Density Polyethylene.

Q – What is PE4710?

A – PE4710 is a high performance grade of HDPE resin. PE4710 has a longer calculated service life, greater resistance to chemicals and a 25% higher pressure rating than comparable PE3408 products.  

Q – What is SDR?

A – SDR is an abbreviation for Standard Dimension Ratio. This is ratio of the inside diameter (SIDR) or outside diameter (SODR) of the water pipe to the wall thickness of the water pipe.  The smaller the SDR number the thicker the wall of the pipe or tubing.  SODR refers to pipe or tubing that is OD controlled.  SIDR refers to pipe or tubing that is ID controlled.

Q – What is the warranty on EndoPure HDPE?

A – Endot provides a Lifetime Warranty on NSF Certified EndoPure HDPE.  See downloadable EndoPure Warranty document.

Q- Will EndoPure HDPE rust or corrode?

A - No.  HDPE is almost chemically inert and does not rust or corrode.  EndoPure HDPE pipe carries a Lifetime Warranty against rust, rot and corrosion.

Q – Does EndoPure HDPE get brittle when cold?

A - No.  HDPE does get harder and stiffer when cold, but HDPE does not get brittle like some plastics.

Click to Minimize